Todos los mensajes

Q: what the price in Saudi Arabia rayal

Preguntado por BG225414463 sobre 2022-03-01 03:00:12

maurits About 104.

2022-03-01 11:14:38 Servicial (0)
Enviar
respuestas (1)

Q: Why there is no UK plug?

Preguntado por Fai00 sobre 2022-02-01 11:20:23

maurits It seems all the ones with UK plugs have been sold out. Ust get yourself a US to UK adaptor plug. Voltage will be OK since the AC adaptor is rated for 100 to 240 volts.

2022-02-01 12:33:19 Servicial (1)
Enviar
respuestas (2)

Q: where I can find BTMate app ? Not available in play store

Preguntado por kdrmanoj sobre 2022-01-15 03:45:37

maurits It seems BTMate is an iOS (Apple) only app. Maybe a similar Android based app will also work.

2022-01-15 04:05:42 Servicial (0)
Enviar
respuestas (1)

Q: how much consume power

Preguntado por BG575317420 sobre 2022-01-05 09:18:14

maurits Needs 12V to 24V.

2022-01-10 05:39:50 Servicial (0)
Enviar
respuestas (2)

Q: can this work to engrave on gold/silver jewellery?

Preguntado por BG131049114 sobre 2021-12-27 08:29:37

maurits Lasers generally do not do well on reflective surfaces, and metal could be a problem for a weakish laser like this. Maybe one can experiment with temporarily painting the surface with paint, and remove it after lasering.

2021-12-28 04:51:55 Servicial (0)
Enviar
respuestas (4)

Q: which kind of cartridge are using for this, magnetic or ceramic?

Preguntado por mailtomejoe sobre 2019-03-13 03:34:32

maurits Probably ceramic.

2021-11-15 08:05:43 Servicial (0)
Enviar
respuestas (1)

maurits No, if you look at the picture of the back of the circuit board, you will see that those holes are connected, thus the same terminal.

2021-10-21 09:30:30 Servicial (0)
Enviar
respuestas (2)

Q: how can I connect to this amplifier? I mean aux or Bluetooth?

Preguntado por BG131411845 sobre 2021-09-29 07:47:58

maurits This amp does not have Bluetooth, only a wired line level input (3 pin input plug next to volume control) where you can connect your signal source via screened cable.

2021-09-29 08:24:32 Servicial (1)
Enviar
respuestas (2)

Q: Can I use a 4 ohm tweeter with this crossover?

Preguntado por BG535015681 sobre 2021-09-20 08:54:51

maurits Yes. But ideally your other drivers should be of the same impedance.

2021-09-21 03:23:08 Servicial (0)
Enviar
respuestas (2)

maurits I don't think so. The engraving area is determinded by the length of the different components. Rather buy the bigger version.

2021-09-12 06:22:40 Servicial (1)
Enviar
respuestas (2)

The seller Under the chip electrolytic capacitor, I think it has no effect.

2021-08-31 03:51:42 Servicial (0)
Enviar
respuestas (1)