Todos los mensajes

Q: which transmitter should I use?

Preguntado por BG223217442 sobre 2020-05-19 07:27:46

Billkater Depends on what receiver you use. The receiver and transmitter protocol has to match.

2021-06-03 01:42:08 Servicial (0)
Enviar
respuestas (2)

Billkater Any servi with. 1.0mm jst connector

2021-06-03 01:40:38 Servicial (0)
Enviar
respuestas (2)

Billkater usually that is true. More option on the higher numbers. Larger. Cost more.

2021-06-03 01:39:38 Servicial (1)
Enviar
respuestas (3)

Q: Do you have just the propellers?

Preguntado por Billkater sobre 2021-05-07 08:11:27

Gypsywas no

2021-06-03 03:52:14 Servicial (0)
Enviar
respuestas (1)

Q: what esc amp. is compatible? thanks.

Preguntado por Ruel Tolosa sobre 2021-05-01 09:02:46

Billkater Effective Current : 2A to 6A, >70% Working Current : 7.5A So, depending on what prop you use. I would guess a 10-15amp esc.

2021-05-04 09:48:47 Servicial (0)
Enviar
respuestas (1)

Q: what type of connector does this board take??

Preguntado por rgembry sobre 2021-05-04 06:12:09

Billkater Servos are JST 1.0mm. Battery is JST 1.25mm. This information is in the discription.

2021-05-04 09:46:40 Servicial (1)
Enviar
respuestas (3)

Q: how i can connect this to the tail rotor ?

Preguntado por BG164316166 sobre 2021-04-03 10:07:52

Billkater solder the wires together. lightly sand them first to get the coating off

2021-04-20 01:22:59 Servicial (0)
Enviar
respuestas (1)

Q: can it carry an all in one fpv camera ?

Preguntado por BG234816141 sobre 2021-04-20 12:10:12

Billkater not likely. it is pretty small.

2021-04-20 01:21:12 Servicial (0)
Enviar
respuestas (4)

Q: This is listed as PNP. What reciever does it have?

Preguntado por Billkater sobre 2021-03-31 07:20:40

James Eagleson Not PNP as far as I know. Must be glued together with CA glue. You will need a receiver that matches your transmitter. Check out the minimum rc website for details ans revpmmendations.

2021-03-31 08:11:39 Servicial (1)
Enviar
respuestas (1)

Billkater Haveyou found a replacement for the TY V2? email me billkater@yahoo.com

Jason 01/03/2021
0
Comentarios (1)

Billkater remap output. motor on channel 1. I had the same problem till doing this on another receiver of this style. not this particular one

2021-03-22 09:25:10 Servicial (0)
Enviar
respuestas (18)