Rogerwilco
mis contenidos
Todos los mensajes
Comentarios
Comentarios
respuestas
Preguntas

Todos los mensajes

HBX 16889A Pro 1/16 2.4G 4WD Coche RC de Alta Velocidad sin Escobillas con Modelos de Vehículos de Proporción Completa
US$106.99 US$145.99

Q: I need to know if this comes with oil shocks

Preguntado por BG371814471 sobre 2021-09-20 02:02:44

Rogerwilco Yes it does, but mine didn't work properly until I changed to a thicker oil.

2021-10-09 01:31:03 Servicial (0)
Enviar
respuestas (1)
Rogerwilco 09/02/2021
Nice multimeter that's decently accurate with a very nice display. However the readability of the main functions around the dial, especially the blue and red, is quite bad. In photos they look ok but not in reality. Still a nice meter with that amazing display but the price has gone up considerably and AU$53.50 is way too high in my opinion.
ANENG SZ18 9999 Contadores profesionales True RMS Multímetro digital Analógico Probador Multímetro DIY Onda de salida de cuadrados Transistor Capacitor Probadores NCV
US$53.12 US$55.99
1
Recomendaciones
Comentarios (0)
Rogerwilco 19/03/2021
The 6 cob version is ok for the price and adequately bright, but no more than that. The sensitivity of the PIR sensor seems pretty low on mine and doesn't come on until you're directly under it. My similarly priced Aldi light is around the same brightness but it is more sensitive to movement, but doesn't look as stylist installed. How it fairs in the longer term is anyone's guess.
Lámpara de pared exterior para jardín con sensor de movimiento PIR y control remoto, alimentada por energía solar y LED COB
US$20.78 US$21.99
0
Recomendaciones
Comentarios (0)
MUSTOOL G1200 Microscopio Digital 12MP Pantalla grande a color de 7 pulgadas Base grande Pantalla LCD 1-1200X Continuo
US$68.99 US$105.99

Q: The USB cable does not fit - seems the connector was installed upside down in the microscope: The cable connector would fit if the USB connector was installed with the broad side towards the screen. The rubber/plastic around the cable connector is too thick to be inserted with the broad side pointing away from the screen!

Preguntado por riteman sobre 2020-02-17 06:06:38

Rogerwilco For anyone still having this issue. Yes the USB socket is poorly positioned (not installed upside down) making it almost impossible to plug the cable in. I had to trim away part of the USB plug to make it thinner and even then it was a tight fit. Do not try a USB C cable, that isn't the problem.

2021-02-09 08:18:43 Servicial (0)
Enviar
respuestas (3)
MUSTOOL G1200 Microscopio Digital 12MP Pantalla grande a color de 7 pulgadas Base grande Pantalla LCD 1-1200X Continuo
US$68.99 US$105.99

Q: I asked about hte G1200 battery and Billy123 answered Hi , Larry , battery is 18650 , available from any vape shop , Amazon or Banggood , hope this helps , Billy Billys123 answered on September 25,2020 The 18650 battery is a AA AND IS IN NO WAY THE CORRECT BATTERY TYPE AS ITS A LI THIN PACK DESIGNED TO PLUG IN. WHY TRY TO LIE AS TO THE CORRECT BATTERY IF YOU DO NOT KNOW. I SUGGEST YOU OPEN ONE UP WITH THE BATTERY BEFORE GIVING OUT BAD INFO AND YOU HAVE NO WAY TO RESPOND TO YOUR ANSWER!!

Preguntado por BG511641317 sobre 2020-09-25 04:26:10

Rogerwilco FYI, 18650 is in no way a AA.

2021-02-09 08:12:23 Servicial (1)
Enviar
respuestas (5)
Rogerwilco 19/12/2020
Excellent torch for the price. Feels good in the hand and solid construction. Throws out a nice beam both at both ends of the zoom. Extra value with the included Li-Ion battery and the USB charging port plus the 4 nice blue status leds. Just make sure to remove the protective clear plastic covering the battery terminals. Very pleased with this torch.
BIKIGHT XHP50 1800lm Potente Kit de Linterna Zoomable de Largo Alcance con Batería de Litio 18650 Recargable po USB y Pantalla de Energía, Mini Antocha con Enfoque Ajustable, Luz Táctica
US$9.94 US$19.99
1
Recomendaciones
Comentarios (0)
Rogerwilco 01/09/2020
I am very impressed with this charger. I've had a few different ones like the LaCrosse BC900 and BC700 but they would overcharge and made the batteries very hot. I also tried the SkyRC NC1500 which couldn't even read the battery voltages correctly. The Opus has performed perfectly and doesn't overcharge which was my main concern. Plus it has the extra options to discharge and test which comes in very handy. I highly recommend this charger if you only need AA/AAA charging.
Opus BT-C700 12V LCD Pantalla 4slots AA AAA NiMH NiCd recargable Batería Cargador
US$29.35 US$35.22
1
Recomendaciones
Comentarios (0)

Rogerwilco Did you remove the protective film?

craigbillybradley 12/06/2020
Good for the price , makes swapping from drone to drone very easy, did come with scratches on display but still happy .
RadioMaster TX8 / JumperTX T8SG 2.4G 12CH Hall Gimbal Transmisor de modo multiprotocolo de código abierto 1/2 para RC Drone
US$94.29 US$98.99
0
Comentarios (1)

Rogerwilco Wow 15% out so why the 5 star rating?

BG103754316 27/11/2019
Received this multimeter on time in good physical condition. Upon initial testing, DC voltage ranges read appox 15% low. This multimeter is either defective or is way out of calibration. Emailed Bangood several times, no response. As of now I recommend do not buy this device and do not buy anything of significant value from the Bangood platform. I will amend this review if the situation is addressed by Bangood.
ET3240 Original de 22000 cuentas Digital de sobremesa Multímetro con pantalla grande y clara Escritorio de alta precisión Multímetro
US$261.02 US$271.99
6
Comentarios (2)
MYTEC 30W 110-240V Glue Gun Hot Melt Glue Gun Graft Repair Tools
US$11.54 US$11.99

Q: You say this is 30W but the item pictures show it's only 20W. Why?

Preguntado por Rogerwilco sobre 2019-10-02 04:16:23

Vivi Pictures are wrong. It is 30W

2019-10-15 08:49:01 Servicial (0)
Enviar
respuestas (1)
Rogerwilco 29/12/2018
I bought this as a kit with no electrics as I had my own parts already. It arrived in Australia very quickly so I set about installing my parts but came across 2 issues nearly immediately. There don't seem to be enough screws supplied to complete the build. In particular the 4 servo mounting screws of which there are only 2 provided, and the identical motor mounting screws it seems are not supplied. I could be wrong but it's not very clear which screws are used for what so I was going by what I could work out with the poor diagram in the manual. What was worse than missing screws is that the servo saver came wound up as tight as possible and I couldn't loosen the adjusting screw even with it in a vice and using large pliers. I nearly ruined it in the process and have had to buy new parts as this can't perform the task it's designed for in it's current state. I did open a case with Banggood but as usual the information and photos provided never seem to be enough for them and I'm over jumping through their hoops.
JLB Racing CHEETAH 21101 ATR 1/10 4WD RC Truggy Coche Sin escobillas Sin piezas electrónicas
US$282.96 US$293.99
3
Recomendaciones
Comentarios (0)

Rogerwilco From a review I saw I think for USB charging this works like a portable battery bank, so you need to remove the 12v external power plug and the USB port will then power on from the Li-Ion cell(s) you have inserted. It's not a replacement for a regular USB charger.

drgum 05/04/2018
Fast delivery; received in 10 days. Appearance looks good. Detailed user manual in English & Chinese included. Able to charge most kind of rechargeable batteries. However, there is something wrong with the USB output. It's just not working (as shown in photos attached). Will write to customer service to get help.
ADEASKA SQ4 inteligente Pantalla LCD USB Cargador de la Batería para Batería IMR / Li-ion Ni-MH / Ni-Cd / LiFePO4
US$42.34 US$49.99
0
Comentarios (2)

Rogerwilco That didn't work for me. Mine seemed to work as follows. 3 wire connector on a8 starting with black wire on the outer pin and then the 2 wire connector on the signal pins with blue on a7 and green on a6. However I've never heard a sound from the buzzer.

Maxheadspace 19/05/2016
This board works great on the APM 2.6. The wiring directions on this site are all hosed up. What worked for me was to run the three-lead connector flat across the 5-6-7 SIGNAL pins, black-red-white, then put the two-wire (blue-green) connector vertical on O1 ground and voltage pins (vertical, as in perpendicular to the three-lead connector). I did not have to change the LED setting in my firmware at all. When I plugged it in and powered up the quadcopter it worked immediately with ARM and GPS lights flashing/locking just as they were supposed to. No software changes. Hope that helps!
Placa de expansión LED Highlight para APM luz LED Lámpara Estado Pantalla
US$14.29 US$15.99
5
Comentarios (1)

Usted es el experto, ¿puede ayudarme?

¡Te invitamos sinceramente a suscribirte al correo electrónico de respuesta de invitación!

Si se suscribe, lo invitaremos por correo electrónico para que responda las preguntas que la gente tenga sobre los productos. ¡Al suscribirte, también ganarás la "Insignia útil "! Puede darse de baja en cualquier momento en la página de configuración de privacidad.

¡Ayuda a los demás y sé más feliz!

  • Suscribir

Sobre insignias

Las insignias están relacionadas con la comunidad, y los usuarios obtienen insignias creando contenido de calidad, completando misiones o participando en actividades especiales. Las personas específicas también tendrán su propia insignia exclusiva.
Insignia del CEO

La insignia del CEO es propiedad exclusiva del jefe de Banggood.

Las insignias que puedes ganar llegarán pronto
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe