https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series

https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series

https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series

Nice Night Fly FPV Mod! Needs A large heat sink!!!

Nice Night Fly FPV Mod! Needs A large heat sink!!!

Nice Night Fly FPV Mod! Needs A large heat sink!!!

Esto es de una cámara de nido. No hay luz. Traté de usar conductores conducidos pero esto mató a tres de ellos. Tuve que conformarme con un resister de 10W 8.2 ohmios. Duración de 3 a 5 min. Se ponen muy calientes. Buen ajuste dentro de una linterna M12 de Milwaukee.

This is from a nest camera. No light at all. I tried using led drivers but this led killed 3 of them. Had to settle for a 10w 8.2 ohm resister. Run time 3 to 5 min. They get really hot. Nice fit inside a Milwaukee m12 flashlight.

Esto es de una cámara de nido. No hay luz. Traté de usar conductores conducidos pero esto mató a tres de ellos. Tuve que conformarme con un resister de 10W 8.2 ohmios. Duración de 3 a 5 min. Se ponen muy calientes. Buen ajuste dentro de una linterna M12 de Milwaukee.

Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out

Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out

Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out

Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W

Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W

Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W

Según el anuncio

De acordo com o anúncio

Según el anuncio

Según el anuncio

De acordo com o anúncio

Según el anuncio

De acuerdo

ok

De acuerdo

Produit conforme état apparent neuf a tester ultérieurement prix très correct

Produit conforme état apparent neuf a tester ultérieurement prix très correct

Produit conforme état apparent neuf a tester ultérieurement prix très correct

Very bright LED, pay attention to the voltage! Optimal for night vision systems.

Very bright LED, pay attention to the voltage! Optimal for night vision systems.

Very bright LED, pay attention to the voltage! Optimal for night vision systems.