Todos los mensajes

Q: What is the speed of the car????

Preguntado por Jagjit sobre 2018-04-19 03:59:46

FPVoutlaw General speed of the car is about 15-18mph. I've achieved 25mph via modifying the motor and the amount of voltage it gets.

2018-11-10 02:34:30 Servicial (0)
Enviar
respuestas (1)

Q: does it have brake

Preguntado por Jeeva Sid sobre 2018-03-22 03:49:49

FPVoutlaw Unfortunately it does not have a brake. But you can Definetly stop or slow yourself with the reverse. But will not hold itself on an incline.

2018-11-10 02:32:17 Servicial (0)
Enviar
respuestas (1)

FPVoutlaw Do a decent battery mod. I wouldn't bother spending the time to replace the 120mah battery. Here: https://youtu.be/1-agMOnVIaQ is a video on doing a battery mod for the l939. I use 230mah to 1200mah 1s Lipo batteries on mine. I've modded 5 of the l939 with various mods. Here: https://youtu.be/CH4-Di51_i4 is another video of mod talk and up keep on the unit. You can also visibly see how I cut a rear section out the rear window to simply slide the battery in and it stays firmly in position. You may see other examples at www.teamdreamshatter.com Good luck and happy RC'n

2018-11-10 02:30:59 Servicial (0)
Enviar
respuestas (1)

FPVoutlaw you can use the right mah 1s HV battery with any connector. just add the proper connector to the quad. example: https://fpvoutlaw.wordpress.com/2018/02/23/air-hogs-dr1-fpv-drone-simple-battery-mod/ check google for HV 🔋

2018-03-18 11:28:27 Servicial (0)
Enviar
respuestas (3)

FPVoutlaw compatible batteries are most all 1s lipos. you can choose different connectors to fit your batteries that you can have shipped to your country via other websites if you'd like. I'd do a jst ph 2.0 and go with a high voltage battery. https://fpvoutlaw.wordpress.com/2018/03/17/air-hogs-dr1-fpv-racing-drone-battery-mod-update/

2018-03-18 11:24:22 Servicial (0)
Enviar
respuestas (3)

Q: What battery connector does this have?

Preguntado por critex sobre 2018-01-13 11:04:55

FPVoutlaw you can use any battery connector you want as long as its rated for a 1s battery. you're not restricted to the connector on the unit

2018-03-18 11:17:15 Servicial (0)
Enviar
respuestas (3)

FPVoutlaw probably due to the polarity reversed. a mess up in production. it is common. and yet people get upset and don't think. I'd desolder the wires after visually inspecting the flight controller to see if the wires are soldered to the correct pads. it should be blatantly obvious due to the pads being labelled +/- if reversed, just switch them. if you care to switch to a more common connection I would. switch to whatever batteries you use mostly.

2018-03-18 11:15:16 Servicial (0)
Enviar
respuestas (2)

Q: Does this work with a taranis QX7?

Preguntado por Spirasio sobre 2017-12-16 07:44:39

FPVoutlaw The receiver on this unit is claimed to be be the D series. The QX7 Compatibility: FrSky X series, D series and V8-II series receivers (plus other receivers if an external module is used) www.Google.com

2018-03-18 11:10:42 Servicial (0)
Enviar
respuestas (4)