Todos los mensajes

1965davidm Acrylic paints are good on foam and plastic. Thin it with water.

2021-07-24 05:24:26 Servicial (1)
Enviar
respuestas (1)

Q: 11.1V Akkumulátorral működik?

Preguntado por TomWalker sobre 2021-07-14 02:40:10

1965davidm As with most receivers these need a supply voltage of about 5 or 6 volts. 11 volts will destroy the electronics. I use either the 5v Bec output from a speed controller or a separate 5v supply from a battery or stand alone Bec.

2021-07-14 03:52:26 Servicial (0)
Enviar
respuestas (2)

1965davidm Everything is in the box, jou just need 4 AA batteries for the transmitter. Before you fly for the first time, put the tramsmitter into expert mode , connect the battery to the airplane and check that all of the control surfaces are centred,

2021-07-05 08:04:51 Servicial (0)
Enviar
respuestas (2)

Q: 0.8mm shafts ?

Preguntado por hwolfe322 sobre 2021-06-14 01:28:16

1965davidm Yes this model uses 615 motors with 0.8mm diameter shafts

2021-07-02 12:27:11 Servicial (0)
Enviar
respuestas (1)

Q: Is it really needed to wash it and if so, what product should be used?

Preguntado por RicBorgs sobre 2021-07-01 07:19:50

1965davidm No need to wash it. The sticker refers to a part of the manufacturing process. Just solder it up and you're done 😃

2021-07-02 12:22:05 Servicial (1)
Enviar
respuestas (1)